Heating technology
Air conditioning
Radio systems
System technology
Building automation
Sensors
RTERU-010.715#00
Floor temperature controller with remote sensor, flush-mounted, 10…50 °C
This electronic two-point controller has been specially developed for controlling electric or hot water heating systems/additional heating systems for floors and other surface temperature control systems. Remote sensor HF-8/4-K2 (4 m) included in the scope of delivery. The heating is switched off in the event of a sensor break or short circuit. The temperature reduction input can be used to set the temperature to approx. 5 K lower (night reduction). In combination with the corresponding cover set JZ-035.xxx, suitable for all standard switch ranges.
Installations-Tutorial
| Number of outputs | 1, 1 |
|---|---|
| Number of outputs, heating | 1 |
| Number of control ranges | 1 |
| Temperature controller version | underfloor temperature controller |
| Output signal | switching |
| External setting | Yes |
| Operation | rotary knob and switches |
| Operating voltage | 230 VAC, 50 Hz, 230 VAC, 50 Hz |
| Design | Berlin UP |
| ECO input (reduction) | 230 VAC, 50 Hz |
| ECO function (reduction) | Yes |
| ECO temperature reduction | approx. 5 K |
| Electric connection | screwed plug-in terminals |
| Electronic control | Yes |
| Energy efficiency class | I |
| Colour | anthracite |
| Sensor element | NTC external |
| Internal setting | No |
| Bearing temperature | –20 … 70 °C |
| Max. air humidity (non-condensing) | 95 % r.H. |
| Housing material | plastic PA6 |
| Max. switching voltage | 230 VAC, 50 Hz |
| Max. switching current | 10 (1) A |
| Mechanical range reduction | Yes |
| Medium | Air |
| Min. switching voltage | 230 VAC, 50 Hz |
| Mounting/attachment | flush mounting (deep socket recommended) |
| Surface finish | matt or gloss (see cover set) |
| Control range | 10 … 50 °C, 10 … 50 °C |
| Heating control function | Yes |
| Cooling control function | |
| Control behaviour | 2-point |
| Switching differential | 1,5 K |
| Switching difference, can be adjusted | No |
| Switching element | relay |
| On/Off switch | Yes |
| Switching contact | normally open contact |
| Potential free switching contact | No |
| Switching power | 2300 W |
| Protection class | IP30 |
| Protection class | II, following appropriate mounting |
| Sensor external | Yes |
| Safety and EMC | in accordance with DIN EN 60730 |
| Scale | Index number scale *…6 |
| Ambient temperature | 0 … 35 °C |
| Assembly | basic device |
| Dimensions (W x H x D) | 71 mm x 71 mm x 46,3 mm |
Loading specification text...
No related products found.