Back to System technology

JDL-115

Differential pressure switch, 100…1000 Pa, internal setting

Differential pressure switch for monitoring overpressure, differential pressure or negative pressure of air and non-flammable, non-aggressive gases. Can be used as a fume cupboard or fan monitor or flow monitor to protect electrical heating registers, as a filter monitor, low air pressure protection or limit value controller. Note: Once the differential pressure switch has switched a voltage > 24 V and a current > 0.1 A, the gold coating on the contacts is burnt off. After this, the differential pressure switch can only be operated with this or a higher power. Note: The JZ-06/1 hose set is not included in the scope of delivery and must be ordered separately.

Supplied with attached mounting bracket JZ-10.


SKU: H5309136 Categories: , ,
Add to wishlist
Compare
JDL-115 — produktbild
JDL-115 — anschlussbild
JDL-115 — masszeichnung
Click to enlarge
    JDL-115 — produktbild
    JDL-115 — anschlussbild
    JDL-115 — masszeichnung
    Number of outputs2, 2
    Number of control ranges1
    Output signalswitching
    External settingNo
    Operationinternal setpoint adjuster
    Pressure connection6.2 mm
    Electric connectionscrew terminals
    Electronic versionNo
    With explosion protectionNo
    Colour
    Sensor element
    Function type (systems engineering)
    Internal settingYes
    Bearing temperature–15 … 80 °C
    Max. air humidity (non-condensing)95 % r.H.
    Housing material
    Max. Pressure30000 Pa
    Max. switching voltage230 VAC, 50 Hz / 24 VDC
    Max. switching current5 (1) A (230 VAC), 1 A (24 VDC), 0,2 A (30 VDC)
    Medium
    Medium temperature−15 … 80 °C
    Min. switching voltage12 VAC, 50 Hz / 12 VDC
    Min. switching current1 mA
    Mounting/attachment
    Surface finishmatt, matt
    Pressure control range100 … 1000 Pa
    Control function, overpressure or underpressureYes
    Switching differential40 … 20 Pa
    Switching element
    Switching contacttwo-way contact
    Potential free switching contactYes
    Protection class
    Protection classII, following appropriate mounting
    Safety and EMCin accordance with DIN EN 60730
    Ambient temperature−15 … 80 °C
    Degree of contamination2

    Downloads

    Installation manual
    RoHS declaration
    BIM data

    Loading specification text...

    No related products found.