Back to Heating technology

HTRRBu110.021

Floor temperature controller with clock, surface-mounted, remote sensor NTC 2K, backlighting

Electronic floor temperature controller for time-dependent control of temperatures in closed rooms. Suitable for floor, edge zone, bathroom, ceiling, tiled stove, marble and wall heating or temperature control systems up to 3000 W. Can be used as a master (pilot controller) to reduce the temperature of other controllers. Controllers of the FETR, FTR and RTBSB series are suitable for this purpose as slaves (satellite controllers). Simple operation with direct selection buttons. In the event of a sensor break or sensor short circuit, the heating is activated with a duty cycle of 30 % to prevent cooling or frost damage in the room. Temperatures below -20 °C are also evaluated as sensor breakage and the emergency run function is triggered. It can also be mounted on a flush-mounted box using an adapter plate.


SKU: MA600400 Categories: , ,
Adaptive heating time startYes
Number of outputs2, 2
Number of outputs, heating1
Number of switching programs7
Number of control ranges1
Actual temperature displayYes
Display typeLCD, illuminated
Temperature controller versionunderfloor temperature controller
Clock versiondigital
Output signalswitching
External settingYes
Operationrotary knob and buttons
Operating voltage230 VAC, 50 Hz
DesignBerlin 3000, Berlin 3000
DisplayYes
ECO output (reduction)230 VAC, 50 Hz
Electric connectionscrew terminals
Energy efficiency classI
Colour
RAL colour number (similar)9010
Sensor elementNTC external
Power reserve7 Days
Shortest switching time15 min
Bearing temperature–20 … 70 °C
Max. air humidity (non-condensing)95 % r.H.
Housing materialplastic ABS
Max. switching voltage230 VAC, 50 Hz
Max. switching current13 (2) A
Mechanical range reductionYes
Medium
Min. switching voltage230 VAC, 50 Hz
With receiverNo
Mounting/attachmentsurface mounting
Surface finishmatt, matt
Party functionYes
Control range10 … 42 °C
Heating control functionYes
Control behaviour2-point
Switching differential1 K (delta T max. 4 K/h)
Switching difference, can be adjustedNo
Switching element
Heating/cooling switchNo
Switching contactnormally open contact
Potential free switching contactNo
Switching power3000 W (230 VAC) / 23 W (230 VAC)
Protection classIP30
Protection classII, following appropriate mounting
Sensor externalYes
Safety and EMCin accordance with DIN EN 60730
ScaleIndex number scale 1…4
Clock typeday/week
Ambient temperature0 … 30 °C
Valve protection functionYes
Type of wiringother
Weather-dependent controlNo
Dimensions (W x H x D)110 mm x 110,7 mm x 26 mm

Loading specification text...

No related products found.