Back to System technology

JSL-1E

Wind vane relay, 2 m/s…9.2 m/s, hysteresis approx. 1 m/s, internal setting

Wind vane relay for monitoring air flows in ducts, in supply and exhaust air units of fans or electric heating registers. The wind vane relay is factory-set to the minimum switching points. The switch-on/switch-off values can be increased by turning the internal screw clockwise. It is installed in a vertical paddle position from above in a horizontal pipe/duct. The setting range is 2 m/s … 9.2 m/s and the hysteresis is approx. 1 m/s.


SKU: JA070100 Categories: , ,
Number of control ranges1
Output signalswitching
Electric connectionscrew terminals
Colourgrey
RAL colour number (similar)7035
Sensor elementwind indicator
Function type (systems engineering)monitor
Internal settingYes
Bearing temperature–40 … 80 °C
Max. air humidity (non-condensing)95 % r.H.
Housing materialplastic
Paddle materialstainless steel V2A (1.4301)
Max. switch-off value8 m/s
Max. switch-on value9.2 m/s
Max. Sensor temperature85 °C
Max. switching voltage230 VAC, 50 Hz
Max. switching current15 (8) A
Medium
Min. switch-off value1 m/s
Min. switch-on value2 m/s
Min. switching voltage24 VAC, 50 Hz
Min. switching current150 mA
Mounting/attachmentmounting on air duct
Surface finishmatt, matt
Switching elementmicroswitch
Switching contacttwo-way contact
Potential free switching contactYes
Switching power3450 W
Protection classIP65 Gehäuse / IP20 medienseitig
Protection classI
Safety and EMCin accordance with DIN EN 60730
Ambient temperature−40 … 80 °C
Degree of contamination2
AssemblyController with sealing plate
Dimensions (W x H x D)71 mm x 130 mm x 67 mm

Loading specification text...

No related products found.