JSW-3/4

For monitoring small and medium, non-aggressive liquid quantities in pipes with a diameter of 3/4″. The device does not require a supply voltage. Installation: Vertically in a horizontal pipe. Calming distance at least 5 times the pipe diameter upstream and downstream of the paddle. Installation/fastening is carried out using a G 3/8″ union nut on a soldering socket (for soldering into a standard copper T-piece with 1/2″ outlet) or T-piece. Not tested for drinking water. Switching point falling 7.0 … 9.5 l/min. Switching point rising 9.0 … 11.0 l/min. Switching differential 2.0 l/min. Accuracy ±15 % of the set target value (switching values only apply when the flow monitor is installed in our T-piece. The switching values increase when copper T-pieces are used).